Who sells motor mounts and balsa

[Paul Taylor]

I found balsa on SHH but no motor mounts. I found motor mounts on Brodaks site but no balsa.

Building a IC profile.

Where do you buy both motor mounts and balsa?

[Dan McEntee]

   SIG!  
  Type at you later,
    Dan McEntee

   Edit to add: Check out Tom Morris also. You may not see it on SHH but may have to ask for it. I know Tom sells maple motor mount stock when he is set of at contests.

[Mike Griffin]

Tom Morris has both.

Mike

[wwwarbird]

Where do you buy both motor mounts and balsa?

 SIG.

[Tim Wescott]

And National Balsa.  I have yet to order anything from them, though.

[dave siegler]

for motor mounts, got a table saw?  I cut my own out of birch or hard maple that I can get locally.

[Steve Kocher]

Paul,

If you had come to the Baton Rouge contest you could have gotten them directly from Tom Morris.  He had a great selection.  You should join us next year.  It's worth the trip from Memphis.

Steve

[Paul Taylor]

Steve its on my bucket list.
I have been on the road all month. Just got in from PDX last night.
I am one tired puppy!

[Motorman]

Is the maple at home depot any good for motor mounts?

[John Craig]

Maple is Maple. It varies a bit as all woods do.  Surprised to hear that H D has maple.  I found maple, not advertised as such, garden stakes at ACE hardware.  I cut them with a cheap Chinese table saw with some difficulty.  Perhaps a different blade would have made it easier.  I am sure they will work just fine.  They have been no problem with the building part.  The flying part will be tested next year.

[Motorman]

http://www.homedepot.com/p/Sure-Wood-Forest-Products-1-in-x-2-in-x-6-ft-Maple-Board-MAPLE1X26-3PL/100085686