News:


  • March 29, 2024, 08:34:45 AM

Login with username, password and session length

Author Topic: Enya 53 -4C setup for Rear Exhaust  (Read 2323 times)

Offline Martin Quartim

  • 22 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 802
    • StuntHobby
Enya 53 -4C setup for Rear Exhaust
« on: January 13, 2011, 11:55:13 AM »

The OS 56FSa  90o Elbow fits perfectly with the Enya 53-4c for a in cowl rear exhaust.

Planing to use it with a Pat Johnston SpitFire Mk XIV 626 in the future.

Total weight in this configuration 430g - 15.2Oz

Martin

Old Enya's never die, they just run stronger!

https://www.youtube.com/user/martinSOLO

Offline Mike Wada

  • ACE
  • Trade Count: (0)
  • Ensign
  • ****
  • Posts: 25
Re: Enya 53 -4C setup for Rear Exhaust
« Reply #1 on: January 13, 2011, 04:31:55 PM »


Aloha Martin,

This is very good information!  Thank you for this post, will use with my Enya 53 on next project.

Mike Wada:)
Mike Wada
AMA 512393

Offline Martin Quartim

  • 22 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 802
    • StuntHobby
Re: Enya 53 -4C setup for Rear Exhaust
« Reply #2 on: January 13, 2011, 08:17:43 PM »
Aloha Mike!

A feature I will try with this engine is to run it in reverse using a pusher prop. I have to thank that info to Bob Zambelli who point it out how easy it is to setup the Enya 53-4C for reverse rotation.

JXF has a  13x6  pusher prop that should work dandy. I have been using the JXF for electric,  they are stronger then regular Top Flite Power point, so I am not one bit afraid of using them. Most of my friends down here are also using the JXF E props.

These are the links for the electric and regular JXF 13x6 Pusher props.

http://www.himodel.com/plane/JXF_13x6_inch_Beechwood_Propeller_for_Electric_Airpalne_Counter_Rotating.html

http://www.himodel.com/plane/JXF_15x6_inch_Beechwood_Propeller_Counter_Rotating.html


Martin
Old Enya's never die, they just run stronger!

https://www.youtube.com/user/martinSOLO

Offline Martin Quartim

  • 22 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 802
    • StuntHobby
Re: Enya 53 -4C setup for Rear Exhaust
« Reply #3 on: January 21, 2011, 11:37:16 AM »

Just for reference, here are some shots of the engine mounted on the SV-11 ARF.  The Enya 53 is so compact that it fits completely inside the cowl. The engine is not seated all the way in because the mounts are a bit narrow on the SV-11 and there is about 1/16  to go.

Martin
Old Enya's never die, they just run stronger!

https://www.youtube.com/user/martinSOLO


Advertise Here
Tags:
 


Advertise Here