Carbon Fiber Props

[Steve Wilk]

Cabon Fiber Stunt Props

I've been making Carbon Fiber Props for more then 15 years now with over 100 different props. I have several Stunt Props, landing gear and a 4" bellcrank and I'm in the process of adding 16 new props.  Check out the attachment to see what I have and what I'm working on.

Steve Wilk
swilk117@yahoo.com

[Steve Helmick]

Steve...I bought some of your props from Burt Brokow when he was up here for the NW CL Regionals last Spring. I haven't had the chance to try them all, but did fly the 10 x 3.5 3 blade Tornado copy. I guess this would have been a finished prop, because the balance was almost perfect and it was pretty much plug n' play. I need to increase the pitch in it a bit, but you're props are nice stuff and prices are good. I hope to get some of the others tested by next Regionals, and I'll report my findings. I hope Burt brings more props (and CF LG's) next year. I didn't get to see a BC. It would be cool if you could post some information on the codes...like the T3-1 is the 3 blade I tried, and what's this T-11 for? Etc.!   Steve

Youse guys buy props from Steve Wilk!

[Steve Wilk]

Hi Steve

Thanks for trying my props.  I currently working on a web page that will have all the info on each props along the prop orgines. I'm also make molds for several of the Rev-up props and hope to have those available next month.  I've attached a Pic of the Bellcrank.  The Bellcrank is made from one piece 12K tow, wrape around several times.  It has a 1/8" ID bronze pivot bushing with 3/32" ID brass lead out bushings.  The hole for the pushrod are left out so you can place them where you need them.  Dubro 1/16" ball links work best for a pushrod connector.

Thanks Steve
 
T-11             9   X 3 1/2     Grish/Tornado
B-7        9 1/2   X 4          Bolley
S-4      10 5/8   X 4 1/4     Modusa
S-6            11   X 5 1/4     Modusa
S-7      11 3/8   X 5 1/4     Modusa
S-8      11 3/4   X 6          Modusa
S-9            13   X 5 1/4     Modusa
S-10            13   X 6          Modusa
T3-1            10   X 3 1/2    Grish/Tornado

[Gerald Schamp]

Hi Steve,

I am looking for some carbon fiber landing gear for profile models. I understand that you make or have these. Would you email me at: geraldschamp@comcast.net and let me know. Walter Hicks told me about these.

Thanks,
Gerald Schamp

[Steve Wilk]

Hi Gerald

I do have have landing gear for a Profile Stunter P-40 class.  I've attached a coulpe of pics
                                                           unfinished    finished
CF Profile Stunt LG                           $25.00   $30.00
CF Profile Stunt LG w/CF Cloth           $30.00   $35.00

Steve
swilk117@yahoo.com

[KEITH McCRARY]

Steve, what is the total weight of a complete pair (right and left) of the large carbon fiber profile landing gears.

Keith McCrary

[Steve Wilk]

Hi Keith

The weight of a pair of carbon fiber landing gear is 60 grams or 2 1/8 onces

The weight of my 4" bellcrank is 7 grams or 1/4 once

Steve
 

[Dwayne Donnelly]

I'd really like a 11X5 3 blade.
Thanks
Dwayne

[Tags:]

Jump to: Please select a destination: ----------------------------- Announcements ----------------------------- => Stunt Hangar Admin announcements ----------------------------- General control line discussion ----------------------------- => Open Forum => CAD USERS => The Suggestion Box ----------------------------- Find One Teach One ----------------------------- => FOTO op Members in your area that are willing to teach control line. ----------------------------- Engine basics ----------------------------- => Four strokes only ----------------------------- Design ----------------------------- => Engineering board ----------------------------- Nostalgia 30 ----------------------------- => Nostalgia 30 ----------------------------- Vendors Corner ----------------------------- => Action Hobbies/Lazer Works => Al Rabe models => Aero Products => builtrightflyright.com => Northcoast Hobby => BJM Enterprises => CFC Graphics => Control Line Central => Control Line World => Core House => Cox International => Eliminator Props => Frank Bowman Rings => JD's Foam Wings => LEE MACHINE SHOP => Minnesotamodeler => PDK LLC Laser Cut Kits => Progressive RC => RSM => Sammy's Model Design => S&S Hobby => U/Tronics Control => Ultra Hobby Products => Wings On Strings ----------------------------- In Memory of ----------------------------- => our friends will be missed ----------------------------- Local Clubs ----------------------------- => Post your club info here