Author Topic: Help needed to identify an ARF (Read 1817 times)

Andrew Tinsley · « **on:** July 08, 2016, 09:44:53 AM »

I have acquired an ARF and I am not sure what it is. Looks like maybe an SV11 or perhaps a Vector. it has that Randy Smith look, but I don't know his designs well enough to tell what it is! Can someone post a picture of these two?
It has a black / white finish with some horrible yellow and red near the wing roots. I shall recover it anyway after the necessary surgery has been done!

Andrew.

Mark Scarborough · « **Reply #1 on:** July 08, 2016, 10:09:25 AM »

some dimensions would probably help, or a picture of what you have.
there is a fairly obvious difference in the size between the Vector and the SV-11

Andrew Tinsley · « **Reply #2 on:** July 08, 2016, 11:58:21 AM »

I will try and take a picture and post it. Problem is that when resizing it for upload I run into difficulties! Will try another resizing programme.

Thanks,

Andrew.

Andrew Tinsley · « **Reply #3 on:** July 08, 2016, 01:42:23 PM »

Hello,
Problem solved, it turns out that it is an Intrepid XL. I did not know that they were available as an ARF. The finish is exactly the same as the photo ID, so I assume it is an ARF? Can anyone confirm that they were available as an ARF sometime in the past?

Thanks,

Andrew.

Author Topic: Help needed to identify an ARF (Read 1817 times)

Andrew Tinsley

Help needed to identify an ARF

Mark Scarborough

Re: Help needed to identify an ARF

Andrew Tinsley

Re: Help needed to identify an ARF

Andrew Tinsley

Re: Help needed to identify an ARF